Development of E-Module Integrated STEM Approach to Improve Students' Critical and Creative Thinking Skills

Authors

  • Tri Zeni Adha Universitas Negeri Padang
  • Asrizal Asrizal Department of Physics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka Air Tawar Padang 25131, Indonesia
  • Fanny Rahmatina Rahim Department of Physics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka Air Tawar Padang 25131, Indonesia

DOI:

https://doi.org/10.24036/ple.v1i2.27

Keywords:

E-module; STEM approach; critical thinking; creative thinking; work and energy.

Abstract

The era of industrial revolution 4.0 aims to develop human resources who can discuss creatively and think critically. Teachers can take advantage of technological developments by designing e-modules that integrate with  STEM approaches that improve students' critical and creative thinking skills. The purpose of this study was to determine the results of validation of integrated e-modules the STEM approach. This research belongs to the  research and development that designs up to the demonstration test stage using a four-dimensional development model. The data collection tool used  validation sheets. The data collection tool used validation sheets. The result obtained from the mean V is 0.68, which is within the valid category. Based on the results of the study, it was concluded that an integrated work and energy materials e-module using a STEM approach would be suitable for use in a Grade X physics class. The e-modules integrated  with STEM approach will be further developed and used as standalone learning materials to overcome the challenges of Industrial Revolution 4.0. This enhances student ability to think critically and creatively, leading to meaningful learning

Downloads

Download data is not yet available.

References

H. Kagermann, “Recommendations for Implementing the Strategic Initiative Industrie 4.0: Final Report of the Industrie 4.0. Working Group, 8.,” in Final Report of the Industrie 4.0. Working Group, 8, 2013.

B. S. N. P. (BSNP)., “Paradigma Pendidikan Nasional Abad XXI. Retrieved From Laporan BSNP.,” Final Report of the Industrie 4.0. Working Group, 8, 2010.

& F. Asrizal., Zan, A. M., Mardian, V., “The Impact of Static Fluid E-module by Integrating STEM on Learning Outcomes of Students’,” J. Educ. Technol., vol. 6, p. 110, 2022.

Permendikbud, “Peraturan Menteri Pendidikan dan Kebudayaan Nomor 103 Tahun 2014 tentang Pembelajaran pada Pendidikan Dasar dan Pendidikan Menengah,” Kementerian Pendidikan dan Kebudayaan Republik Indonesia, 2014.

A. Muis, “Analisis Kritis Kurikulum antara KBK, KTSP, dan K-13,” J. Ilm. Iqra’, vol. 12, p. 49, 2018.

S. Rahayu, I., “The Development of E-modules Project Based Learning for Students of Computer and Basic Networks at Vocational School. Journal of Education Technology,” J. Educ. Technol., vol. 4, pp. 399–400, 2020.

M. Susanti, T., Kurniadewi, F., & Nurjayadi, “Development of Protein Metabolism Electronic Module by Flip PDF Profesional Application.,” J. Phys. Annu. Conf. Sci. Technol., vol. 01, pp. 1–2, 2021.

A. Hadinugrahaningsih, T., Rahmawati, Y., & Ridwan, “Developing 21st Century Skills in Chemistry Classrooms: Opportunities and Challenges of STEAM Integration. AIP Conference Proceeding,” AIP Conf. Proceeding, vol. 1, p. 30008, 1868.

A. Permanasari, “STEM Education: Inovasi dalam Pembelajaran Sains. Prosiding SNPS (Seminar Nasional Pendidikan Sains),” in Prosiding SNPS (Seminar Nasional Pendidikan Sains), 2016, pp. 23–24.

X. Conradty, C., Sotiriou, S, A., & Bogner, F, “No Title,” 2020.

& F. Asrizal., Hendri, A., “Penerapan Model Pembelajaran Penemuan Mengintegrasikan Laboratorium Virtual dan Hots untuk Meningkatkan Hasil Pembelajaran Siswa SMA Kelas XI.,” in Prosiding Seminar Nasional Hibah Program Penugasan Dosen ke Sekolah (PDS), 2018, p. 50.

H. Ennis, R., “Critical Thinking. New Jersey:,” New Jersey, 2011.

D. Filsaisme, K., Menguak Rahasia Berpikir Kritis dan Kreatif. Jakarta, 2008.

A. D. Schafersman, An Introduction to Critical Thinking. Texas, 2008.

F. Fernando., Darvina, Y., Yulia, S., Dwiridal, L., & Rahmatina, “The Effect of Hots Oriented Worksheets With Barcode Asistant in Online Learning to The Students’ Critical and Creative Thingking on Heat and The Kinetic Theory of Gases Learning Topic in Grade XI 1st Harau District Senior High School,” J. Res. Policy Pract. Teach. Teach. Educ., vol. 8, p. 46, 2021.

F. Junira, T., Dwiridal, L., & Rahmatina, “he Effect Of Hots-oriented Worksheets With Barcode Assistance in Online Learning on Critical Thinking and Creatives of Students of Class XI SMAN 1 Harau.,” Pillar Phys. Educ., vol. 14, p. 15, 2021.

M. Amabile, T. M., Khaire, Creativity and Role of the Leader. London, 2008.

Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung, 2017.

M. Tessmer, Planning and Conducting Formative Evaluation. London, 1997.

Trianto, Mendesain Model Pembelajaran Inovatif-Progresif. Surabaya, 2012.

I. Suhardi, “Perangkat Instrumen Pengembangan Paket Soal Jenis Pilihan Ganda Menggunakan Pengukuran Validitas Konten Formula Aiken’s V,” J. Pendidik. Tambusai, vol. 6, p. 4160, 2022.

H. Retnawati, Analisis Kuantitatif Instrumen Penelitian. Yogyakarta, 2016.

D. A. M. M. O. Priantini, “The Development of Teaching Video Media Based on Tri Kaya Parisudha in Educational Psychology Courses.,” J. Educ. Technol., vol. 4, p. 450, 2020.

B. Johnson., Elaine, Contextual Teaching and Learning. Bandung, 2014.

Departemen Pendidikan Nasional, “Panduan Pengembangan Bahan Ajar Revisi,” 2018.

A. Prastowo., Panduan Kreatif Membuat Bahan Ajar Inovatif. Yogyakarta, 2011.

& A. R. Sudjana., Nana., Teknologi Pengajaran. Bandung, 2009.

G. Shoffa, S., Holisin, L., Palandi, JF., Cacik, S., Indriyani, D., Supriyanto, EE., & Giap, Perkembangan Media Pembelajaran di Perguruan Tinggi. Bojonegoro, 2021.

S. Rustan., Layout Dasar dan Penerapannya. Jakarta, 2014.

S. Nasution, Berbagai Pendekatan dalam Proses Belajar Mengajar. Jakarta, 2008.

J. Anggito, A., Setiawan, Metodologi Penelitian Kualitatif. Sukabumi, 2018.

T. N. Hanafi, Y., Murtadho, N., Ikhsan, M. A., Diyana, “Reinforcing Public University Student’s Wordship Education bt Developing and Implementing Mobile-Learning Management System in the ADIIE Intructional Design Model.,” Int. J. Interact. Technol., vol. 14, pp. 222–223, 2020.

A. Arsyad., Media Pembelajaran. Jakarta, 2010.

& R. Wang., H. H., Moore, T. J., “STEM Integration: Teacher Perceptions and Practice,” J. Pre-College Eng. Educ. Res., vol. 1, pp. 1–2, 2011.

N. Abdurrahman., Ariyani, F., Maulina, H., & Nurulsari, “Design and Validation of Inquiry-based STEM Learning Strategy as a Powerful Alternative Solution to Facilitate Gifted Students Facing 21st Century Challenging.,” J. Educ. Gift. Young Sci., vol. 7, pp. 36–37, 2019.

Downloads

Published

2023-06-30

How to Cite

Adha, T. Z. ., Asrizal, A., & Rahim, F. R. (2023). Development of E-Module Integrated STEM Approach to Improve Students’ Critical and Creative Thinking Skills. Physics Learning and Education, 1(2), 62–70. https://doi.org/10.24036/ple.v1i2.27